Focus-foodservice Enclosure Panels on Wire Shelving with Aluminum Tr Manuel d'utilisateur télécharger pdf

ASSEMBLY INSTRUCTIONS

Enclosure Panels on Wire Shelving with Aluminum Truck Dolly

FOODSERVICE, LLC

CAUTION:

INSPECT CONTENTS IMMEDIATELY TO ENSURE PRODUCT WAS NOT DAMAGED DURING SHIPPING.

Assemble Wire Shelving Unit to Truck Dolly

Step 1 Unpack carton, identify and conﬁrm quality of components.

Step 2 Before assembly of shelving unit to Truck Dolly, unscrew the leveling feet on the posts (See Diagram 1).

Step 3 Attach the posts to Truck Dolly frame, using leveling feet and washers and tighten down (See Diagram 2).

Step 4 Choose the desired height of the bottom shelf (for added stability, it is recommended that the bottom shelf is installed no

more than 6"(2 – 3 lines) above the truck dolly and the top shelf no more than 6"(2 – 3 lines) from the top.) Snap two (2)

tapered sleeves, with the word UP on top, at the desired height on each post. (See Diagram 3) Shelves can be adjusted

every 1". (Note: Double grooves in the posts are placed every 8th groove for simple shelf height reference.)

Step 5 Snap the tapered sleeves into place on posts at the next desired shelf height. Slide the shelf down from the top of the posts

onto the tapered sleeves and repeat this step for the remaining shelves. (Note: A rubber mallet may be used to tap each

corner of the shelves so they ﬁrmly install onto the tapered sleeves.)

Attach Enclosure Panels (See Diagram 4)

Step 6 Place (2) S-hooks Assemblies such that they slide down over the top portion of each truss on the top shelf of the shelving

unit. Make sure to space the S-hooks Assemblies so that they are approx. 4" from the shelving collars and aligned to the

second square from each end of the side panels.

Step 7 Attach the side panels: The (2) horizontal bars should face toward the shelving unit. Place the side panel onto the already

positioned S-hooks. Make sure that the position of the S-hooks Assemblies are positioned on second horizontal bar.

Step 8 Secure the side panels: Secure the S-hook Assemblies to the panel using the nut and bolt. Secure the bottom panel to the

bottom shelf truss using C-Channel Bracket Assemblies. Space each approx. 3" from shelving collar.

Step 9 Tighten all screws to ensure secure ﬁt. Repeat process for remaining side panel and rear panels.

Enclosure Panel Requirements

Ends- Panels required for EACH end according to shelf widths as follows

Nominal

Post Height

Nominal Shelf Width

18" (45.7 cm) 21" (53.0 cm) 24" (61.0 cm) 30" (76.0 cm) 36" (91.4 cm)

54" (137.2 cm) (1) FEP1854CH (1) FEP1854CH (1) FEP2454CH (2) FEP1854CH (1) FEP1854CH & (1) FEP2454CH

63" (160.0 cm) (1) FEP1863CH (1) FEP1863CH (1) FEP2463CH (2) FEP1863CH (1) FEP1863CH & (1) FEP2463CH

74" (188.0 cm) (1) FEP1874CH (1) FEP1874CH (1) FEP2474CH (2) FEP1874CH (1) FEP1874CH & (1) FEP2474CH

Backs - Requires multiple panels IN QUANTITIES SHOWN for speciﬁc shelf lengths:

Nominal

Post Height

Nominal Shelf Length

30" (76.0 cm) 36" (91.4 cm) 42" (106.6 cm) 48" (122.0 cm) 54" (137.0 cm) 60" (152.4 cm) 72" (182.9)

54" (137.2 cm) (2) FEP1854CH (1) FEP1854CH & (1) FEP2454CH (2) FEP2454CH (2) FEP1854CH & (1) FEP2454CH (1) FEP1854CH & (2) FEP2454CH (3) FEP2454CH (1) FEP1854CH & (3) FEP2454CH

63" (160.0 cm) (2) FEP1863CH (1) FEP1863CH & (1) FEP2463CH (2) FEP2463CH (2) FEP1863CH & (1) FEP2463CH (1) FEP1863CH & (2) FEP2463CH (3) FEP2463CH (1) FEP1863CH & (3) FEP2463CH

74" (188.0 cm) (2) FEP1874CH (1) FEP1874CH & (1) FEP2474CH (2) FEP2474CH (2) FEP1874CH & (1) FEP2474CH (1) FEP1874CH & (2) FEP2474CH (3) FEP2474CH (1) FEP1874CH & (3) FEP2474CH

1 2 3 4

Résumé du contenu

Page 1 - ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONSEnclosure Panels on Wire Shelving with Aluminum Truck DollyFOODSERVICE, LLCCAUTION: INSPECT CONTENTS IMMEDIATELY TO ENSURE PRODUC

Page 2

ASSEMBLY INSTRUCTIONSCall Customer Service at 1.800.968.3918 | Fax 1.800.968.4129 www.focusfoodservice.comrev. 0811TaperedSleevesPostShelfCollarTa

Page 3 - INSTRUCCIONES DE ARMADO

INSTRUCCIONES DE ARMADOPaneles de Cierre en Estantería de Alambre con Carro de AluminioFOODSERVICE, LLCPRECAUCIóN: INSPECCIONE EL CONTENIDO INMEDIATAM

Page 4

INSTRUCCIONES DE ARMADOCall Customer Service at 1.800.968.3918 | Fax 1.800.968.4129 www.focusfoodservice.comrev. 0911Manguitos ahusadosPosteCollar

Commentaires sur ces manuels

Pas de commentaire

Focus-foodservice Enclosure Panels on Wire Shelving with Aluminum Tr Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Meubles Focus-foodservice Enclosure Panels on Wire Shelving with Aluminum Tr. Focus Foodservice Enclosure Panels on Wire Shelving with Aluminum Truck Dolly - Specification Sheets User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Meubles Focus-foodservice Enclosure Panels on Wire Shelving with Aluminum Tr